forfour.co.uk

Advanced search  

News:

Pages: [1] 2 3

Author Topic: the project begins  (Read 14898 times)

Sidle

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
the project begins
« on: February 21, 2012, 10:59:47 AM »
well my smart transplant project began today (would have been started sooner but the weather scuppered that plan.

so i have a 05 plate brabus with 37000 miles, so far we have removed

seats
carpets
airbags
trim

this week we intend to remove
engine
gearbox
suspension
brakes
exhaust
wiring loom
and front end of the car

all to make way for a Subaru WRX STI V7 EJ20 conversion to include all running gear
six speed box, four wheel drive, brembo brakes, ancillaries, then the front of the brabus will be re grafted back on to car to help with the oem (ish) look,

Pics will be uploaded as soon as i can find the camera cable

 
Logged

nomad8459

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 630
  • Jack Black Is Funny!
Re: the project begins
« Reply #1 on: February 21, 2012, 11:44:25 AM »
Sounds tasty, wouldn't it have been easier to try and get a 2 litre mitsu block in there tho?

The Suburu is nice of course but keeping with the history of the car, a nod to mitsu could have been nice?

Probably would be a very, very thirsty car then though.

Good luck with it, and be careful, that thing would out run anything on the road once finished I suspect, keep an eye on weight balancing, may need to compensate for that big engine up front, unless your mounting it in the middle of course?

 ;D
Logged
SMART ForFour 1.3i 16V Mivec Soft-touch Passion in Jack Black and Silver - Bobster

CrazyG

  • Owner of 3x 454 + 3x ForTwo !
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9136
  • London Heathrow airport area.
    • S2smarts
Re: the project begins
« Reply #2 on: February 21, 2012, 11:46:01 AM »
I'm sure you'll find lots of buyers for any of the Brabus bits that you
remove/have removed.....can I ask if you would offer them up on here
first ?

So at the end of it all you'll have a Smartbaru or a Smubarart, eh ?
Logged
454 - Brabus (mapped, Willwood brakes, coilovers etc etc)
454 - Passion CDi 95hp (manual, full Brab body kit, coilovers etc)
454 - Passion 1.3 (manual, Brab body kit, lowered etc) [SORN'd]
451 - Pulse Turbo [my daily drive] (mapped, coilovers etc)
450 - 'Widestar' Passion 700cc [SORN'd]

Sidle

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
Re: the project begins
« Reply #3 on: February 21, 2012, 11:56:03 AM »
i will of course offer all parts for sale on here, however wont be doing till the end, so can photo / list all the smart subaru parts at same time.

Today have ordered some BC coil overs to go with the BBS wheels.
car will be corner weighed and more bracing will be added, rear doors will be smoothed in and car is going to get an impreza blue paint scheme. The plan is to try have it ready for brooklands this year (however that depends how busy work is) and how easy it passes an sva! (gulp)
Not decided on a name yet, was thinking brabaru
Logged

CrazyG

  • Owner of 3x 454 + 3x ForTwo !
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9136
  • London Heathrow airport area.
    • S2smarts
Re: the project begins
« Reply #4 on: February 21, 2012, 12:13:06 PM »
"Brabaru".....kinda catchie that....  more so than a "Smarbaru"
« Last Edit: February 21, 2012, 12:14:13 PM by CrazyG »
Logged
454 - Brabus (mapped, Willwood brakes, coilovers etc etc)
454 - Passion CDi 95hp (manual, full Brab body kit, coilovers etc)
454 - Passion 1.3 (manual, Brab body kit, lowered etc) [SORN'd]
451 - Pulse Turbo [my daily drive] (mapped, coilovers etc)
450 - 'Widestar' Passion 700cc [SORN'd]

cosminnedelcu

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 325
  • Be Smart ! Be U !
    • SMARTFAN
Re: the project begins
« Reply #5 on: February 21, 2012, 12:21:07 PM »
when you take out the eom engine can you take some photo ? i have a project but i whant to keep the original engine 1.5 diesel and transform the car in four wheel drive , but with some good pictures and some fizic measures i will search the gearbox and back track for my car .

you are participating at the unmounting to know if i can send you some questions :P

tks
Logged
Air is drawn into the cylinder of a diesel engine and compressed by the rising piston at a much higher compression ratio than for a spark-ignition engine, up to 25:1. The air temperature reaches 700-900 C, or 1300-1650 F.

Problemchild

  • BRABUS Owner
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 10006
  • 100 smiles per gallon........... BRISTOL, UK
    • EVILUTION
Re: the project begins
« Reply #6 on: February 21, 2012, 01:04:20 PM »
Looking forward to seeing this develop BIG time :)

JJ
Logged

Sidle

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
Re: the project begins
« Reply #7 on: February 21, 2012, 04:54:29 PM »
me too, going to continue the stripping this week :D
Logged

Bat28

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 62
Re: the project begins
« Reply #8 on: February 21, 2012, 06:17:39 PM »
Very nice project !

Looking forward to see the transformation !  :P
Logged
ForFour Brabus ! Mint - Low miles - For sale !

brulaw

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 604
  • There is only one brubus ......... S E London .
Re: the project begins
« Reply #9 on: February 22, 2012, 12:44:28 AM »
Looking forward to seeing the result , should be a very tasty beast  .
Logged

ForFour  ....... It knows it's  smart .
www.forfour.co.uk

funkydoodycool

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1710
  • Life's short and too hard like a body-building elf
    • funkydoodycool's website
Re: the project begins
« Reply #10 on: February 22, 2012, 10:35:59 AM »
This is a very exciting project - especially as my Brabus is the compromise I came to because I couldn't afford to run an impreza!

Looking forward to some pictures and updates on how you're getting on.

Good luck fitting all that in the tiny engine bay!
Logged

------

CrazyG

  • Owner of 3x 454 + 3x ForTwo !
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9136
  • London Heathrow airport area.
    • S2smarts
Re: the project begins
« Reply #11 on: February 22, 2012, 12:47:39 PM »
Quote from: CrazyG on February 21, 2012, 12:13:06 PM
"Brabaru".....kinda catchie that....

Re-think on that.... calling it a Smart Brabaru makes it sound like
a knackered old Aussie pick-up truck !   
How about  Subaru For x Four 
Logged
454 - Brabus (mapped, Willwood brakes, coilovers etc etc)
454 - Passion CDi 95hp (manual, full Brab body kit, coilovers etc)
454 - Passion 1.3 (manual, Brab body kit, lowered etc) [SORN'd]
451 - Pulse Turbo [my daily drive] (mapped, coilovers etc)
450 - 'Widestar' Passion 700cc [SORN'd]

Fox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 623
  • Luton
Re: the project begins
« Reply #12 on: February 22, 2012, 01:56:08 PM »
hahaha enough with the names G, it should be a - Scoo-by-four :)

This sounds like a very fun project! Are you making use of any of the Brabus kit or did you buy a Brab just for the interior trim level?
« Last Edit: February 22, 2012, 01:58:15 PM by Fox »
Logged
One Saab forfour, one Saab Vector Sport.

brulaw

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 604
  • There is only one brubus ......... S E London .
Re: the project begins
« Reply #13 on: February 24, 2012, 11:15:45 PM »
Come on  guys , it's so obvious what the name should be  ........ anyone spelt Brabus  backwards ........... thats it ......." Subarb"  ;D
Logged

ForFour  ....... It knows it's  smart .
www.forfour.co.uk

nomad8459

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 630
  • Jack Black Is Funny!
Re: the project begins
« Reply #14 on: February 24, 2012, 11:17:12 PM »
That's class Bru! He could paint it yellow and red and call it the Rhubarb Subarb! ;D
Logged
SMART ForFour 1.3i 16V Mivec Soft-touch Passion in Jack Black and Silver - Bobster
Pages: [1] 2 3
« previous next »